• Proteco BARRY Automatic Road Barrier with a grey metal cabinet, white boom arm and red reflective panels.
  • Proteco BARRY Automatic Road Barrier with a grey metal cabinet and white telescopic boom marked with red stripes, shown raised.
1 2

Proteco BARRY Automatic Road Barrier

Proteco BARRY Automatic Road Barrier

QAR 4.500,00
QAR 4.500,00
Sale Sold out
Taxes included. Shipping calculated at checkout.

Proteco BARRY is listed for automatic road-barrier projects. If replacing a damaged barrier, document the condition of the cabinet base, arm assembly and detectors so the proposal covers the whole lane rather than only a new motor unit.

Confirmed product details

  • Automatic road barrier with a telescopic boom.
  • The manufacturer range covers openings up to 6 m.
  • Confirm the motor version, boom assembly and accessories in the quotation.

BARRY: review replacement and commissioning requirements

An existing access reader may be retained only if its interface is compatible with the new controller. Commissioning should test a complete vehicle passage and the intended closing logic. Confirm the offered barrier configuration before arranging removal of old equipment.

Price and supply scope

Price on request. Request a written quotation confirming the exact model, included equipment, availability and installation scope.

Request a quotation

Request a quote on WhatsApp · Contact Comunello Qatar

Manufacturer documentation

Frequently asked questions

Can BARRY retain my existing opening controls?

Provide the reader or receiver model and the current wiring arrangement. The control interface and vehicle-detection sequence need to be checked against the supplied BARRY controller.

How do I confirm the supplied Proteco BARRY Automatic Road Barrier configuration?

Use the product details and manufacturer documents above when reviewing the offer. The quotation must identify the selected model or variant and list included equipment and installation work.

What should I send with my Proteco BARRY Automatic Road Barrier enquiry?

If replacing a damaged barrier, document the condition of the cabinet base, arm assembly and detectors so the proposal covers the whole lane rather than only a new motor unit. Include your Qatar site location and say whether you need equipment supply, installation or a replacement assessment.

BARRY Lane Survey in Qatar

Send clear lane width, overhead clearance, vehicle types, expected peak traffic and required opening method. Confirm the exact boom assembly, balance and support arrangement against the offered model's instructions.

Foundations, Detection and Safety

The installation assessment should cover anchor locations, foundation condition, drainage, cabling and vehicle presence detection. Define how the lane behaves while a vehicle waits and passes. Plan a separate pedestrian route and assess the actual entrance risks.

Replacement Scope and Maintenance

Ask the quotation to separate removal, reusable infrastructure, new equipment, civil works, electrical connection and commissioning. An AMC can include checks of boom balance, fixings, detectors, safety inputs and release operation, with response and parts coverage stated in writing.

Manufacturer Comparison: BARRY and BARRY DC

Specification BARRY BARRY DC
Motor supply 230V AC 24V DC
Main supply 230V AC, 50 Hz 230V AC, 50 Hz
Motor power 200 W 160 W
Protection IP44 IP44
Published opening time 6 seconds 6 seconds
Technical-table boom range 3.6–6.0 m 3.6–6.0 m
Published maximum cycles/hour 150 200

The manufacturer's introductory text describes a 3.0–6.0 m telescopic boom, while its technical table states 3.6–6.0 m. Confirm the exact supplied boom and permitted configuration in writing, especially for passages below 3.6 m. Official Proteco BARRY technical data.

Related services

Automatic parking barrier systems in Qatar · Preventive maintenance and AMC · Gate repair

View full details

Frequently Asked Questions

What boom length is available for the Proteco BARRY Automatic Road Barrier?
The manufacturer range covers openings up to 6 m. Its introductory text describes a 3.0–6.0 m telescopic boom, while the technical table lists 3.6–6.0 m, so confirm the exact boom and permitted configuration in writing—especially for passages below 3.6 m.
What should I check before replacing an existing road barrier with BARRY?
Document the condition of the cabinet base, arm assembly and detectors so the proposal can cover the whole lane, not just a motor unit. Also provide the reader or receiver model and current wiring arrangement if you want to assess whether existing controls can be retained.
Can the Proteco BARRY Automatic Road Barrier work with my existing access reader?
An existing reader may be retained only if its interface is compatible with the new controller. Provide the reader or receiver model and wiring details so the control interface and vehicle-detection sequence can be checked against the supplied BARRY controller.
What details should I include when requesting a BARRY quotation?
Include your Qatar site location and whether you need equipment supply, installation or a replacement assessment. Ask for a written quotation that confirms the exact model, included equipment, availability and installation scope; the price is available on request.
What should commissioning of the Proteco BARRY Automatic Road Barrier include?
Commissioning should test a complete vehicle passage and the intended closing logic. The installation assessment should also cover vehicle-presence detection and define how the lane behaves while a vehicle waits and passes.