{"title":"Proteco Swing Gate Motors Qatar","description":"\u003cp\u003e\u003cstrong\u003eLooking for a Proteco swing gate motor in Qatar?\u003c\/strong\u003e Comunello Qatar supplies selected Proteco Automation swing-gate operators for villas, compounds and commercial entrances, with technical selection, installation and maintenance support.\u003c\/p\u003e\u003ch2\u003eWhich Proteco swing gate motor should I choose?\u003c\/h2\u003e\u003cp\u003eThe correct operator depends on gate-leaf length, actual leaf weight, hinge and pillar geometry, opening angle, wind exposure and expected daily operating cycles. The motor should be selected from the complete gate application rather than weight alone.\u003c\/p\u003e\u003ch2\u003eWhat is the Proteco ASTER 4?\u003c\/h2\u003e\u003cp\u003eProteco ASTER 4 is a 230V swing-gate operator in our current range. It should be matched to the gate dimensions, mechanical condition, hinge geometry and site environment before installation.\u003c\/p\u003e\u003ch2\u003eWhen is a telescopic swing gate operator useful?\u003c\/h2\u003e\u003cp\u003eA telescopic linear actuator can provide the travel required for suitable hinged-gate installations while maintaining a compact operator arrangement. Gate geometry and mounting dimensions must be checked against the selected Proteco model.\u003c\/p\u003e\u003ch2\u003eIs a Proteco motor suitable for a solid privacy gate?\u003c\/h2\u003e\u003cp\u003eIt can be suitable when correctly selected, but solid gates create additional wind loading. Gate surface area, site exposure, leaf dimensions and hinge condition should be assessed before choosing the operator.\u003c\/p\u003e\u003ch2\u003eCan Proteco swing gates use photocells, remotes and access control?\u003c\/h2\u003e\u003cp\u003eCompatible Proteco installations can be configured with appropriate safety photocells, remote controls and access-control devices according to the selected control panel and project requirements.\u003c\/p\u003e\u003ch2\u003eDo you install Proteco swing gate motors in Qatar?\u003c\/h2\u003e\u003cp\u003eYes. Comunello Qatar provides technical selection, supply, professional installation, commissioning, repair and preventive maintenance for compatible Proteco swing-gate systems across Qatar.\u003c\/p\u003e\u003ch2\u003eHow do I request a Proteco swing gate quotation?\u003c\/h2\u003e\u003cp\u003eSend the gate-leaf width, approximate weight, gate construction, hinge and pillar dimensions, site photos, location and expected daily usage. We can review the application and recommend an appropriate Proteco operator and safety configuration.\u003c\/p\u003e","products":[{"product_id":"proteco-telescopic-swing-gate-operator","title":"Proteco Telescopic Swing Gate Operator","description":"\u003cp\u003eUpgrade your gate automation with the Proteco Telescopic Swing Gate Operator. This top-tier Proteco swing gate operator guarantees smooth and reliable performance for your residential or commercial swing gates. Designed for precision and durability, it transforms your entrance with effortless control and advanced technology.\u003c\/p\u003e\u003cp\u003eWhy settle for less when you can have the best? The Proteco Telescopic Swing Gate Operator uses a unique telescopic arm design to ensure smooth opening and closing. It fits a wide range of gate sizes and withstands harsh wind and weather conditions. Whether you want to replace an old actuator or install a new system, this operator delivers flawless operation every time.\u003c\/p\u003e\u003cp\u003e**Key Features \u0026amp; Benefits:**\u003c\/p\u003e\u003cp\u003e• Engineered by Proteco for unmatched durability and efficiency.\u003cbr\u003e• Telescopic arm design saves space in tight installation spots.\u003cbr\u003e• Fits various gate sizes, hinges, and withstands strong winds.\u003cbr\u003e• Easy model identification via nameplate and electrical specs.\u003cbr\u003e• Compatible with smart access controls and phone integrations.\u003cbr\u003e• Clear installation instructions for pillar-side mounting.\u003cbr\u003e• Ideal for villas, commercial complexes, and gated communities.\u003cbr\u003e• Supports preventive and annual maintenance plans.\u003cbr\u003e• Includes manufacturer manuals and dedicated technical support.\u003c\/p\u003e\u003cp\u003eThe Proteco swing gate operator stands out with superior manufacturing quality. Its precise travel and bracket measurements ensure a perfect fit on your gate. Installation is straightforward with all necessary accessories supplied. Plus, it supports future-ready smart access systems, enhancing your property's security and convenience.\u003c\/p\u003e\u003cp\u003e**Detailed Specifications:**\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Proteco\u003c\/li\u003e\n\u003cli\u003eApplication: Swing gate automation\u003c\/li\u003e\n\u003cli\u003eSuitable for double-leaf gates\u003c\/li\u003e\n\u003cli\u003eModel identified by nameplate and electrical version\u003c\/li\u003e\n\u003cli\u003eRequires exact fixing point measurements (gate open\/closed)\u003c\/li\u003e\n\u003cli\u003eInstallation verified using motor label and manual\u003c\/li\u003e\n\u003cli\u003ePrice: QAR 4,500.00 (installation and civil works extra)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e**Usage Scenarios:**\u003c\/p\u003e\u003cp\u003eThe Proteco Telescopic Swing Gate Operator excels in various settings. It is perfect for villa entrances across Qatar, blending seamlessly with gate pillars. Commercial properties benefit from its robust build for heavy and frequently used gates. Its design withstands harsh weather and strong winds, making it reliable year-round. Whether replacing an old actuator or installing new automation, it adapts perfectly to your site’s needs.\u003c\/p\u003e\u003cp\u003e**What Makes This Product Special?**\u003c\/p\u003e\u003cp\u003eProteco’s precise engineering and adaptability set this operator apart. Unlike generic actuators, it uses exact gate measurements for flawless operation. The telescopic arm design optimizes space, ideal for limited areas. Proteco’s quality ensures fewer breakdowns and a longer lifespan. Its compatibility with smart access controls keeps your automation future-ready and secure.\u003c\/p\u003e\u003cp\u003e**How to Confirm Your Proteco Telescopic Swing Gate Operator Configuration?**\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your model code and electrical specifications. Send a clear photo of your old actuator’s nameplate. Measure fixing points with the gate open and closed. Review the manuals to verify included accessories. This ensures you receive the correct operator tailored to your gate.\u003c\/p\u003e\u003cp\u003e**Frequently Asked Questions:**\u003c\/p\u003e\u003cp\u003eQ: Which Proteco telescopic version do I need?\u003cbr\u003eA: Provide the old operator’s nameplate, control board model, and fixing measurements. This info identifies the exact model and electrical version.\u003c\/p\u003e\u003cp\u003eQ: How do I maintain the Proteco Telescopic Swing Gate Operator?\u003cbr\u003eA: Regularly check gate movement, fixings, and safety functions. Follow maintenance instructions to maintain reliability.\u003c\/p\u003e\u003cp\u003eQ: What should I send with my enquiry?\u003cbr\u003eA: Include a clear nameplate photo, gate leaf dimensions, weight, and opening angle. Mention your Qatar site location. Specify if you need supply, installation, or assessment.\u003c\/p\u003e\u003cp\u003e**Take Action Now!**\u003c\/p\u003e\u003cp\u003eDon’t compromise on gate automation quality. Choose the trusted Proteco Telescopic Swing Gate Operator today. Request a precise telescopic gate operator quote from Comunello Qatar. Contact us via WhatsApp or phone. Our experts guide you through model selection, installation, and aftercare plans. Secure your property with smooth, reliable swing gate automation.\u003c\/p\u003e\u003cp\u003eEnhance your entrance with Proteco’s proven technology. Order your Proteco Telescopic Swing Gate Operator now for effortless gate control.\u003c\/p\u003e\u003cp\u003e**Product FAQs:**\u003c\/p\u003e\u003cp\u003eQ: How do I maintain the Proteco Telescopic Swing Gate Operator for best performance?\u003cbr\u003eA: Regularly check gate movement, fixings, and safety functions. Proper maintenance keeps the Proteco Telescopic Swing Gate Operator reliable and efficient.\u003c\/p\u003e\u003cp\u003eQ: What makes the Proteco swing gate operator ideal for harsh weather conditions?\u003cbr\u003eA: The Proteco swing gate operator is built for durability, ensuring reliable automation even in tough weather.\u003c\/p\u003e\u003cp\u003eQ: How can I get a reliable telescopic gate operator quote for my gate?\u003cbr\u003eA: Contact Comunello Qatar with your gate details to receive a precise telescopic gate operator quote.\u003c\/p\u003e","brand":"Proteco Automation","offers":[{"title":"Default Title","offer_id":43102922703006,"sku":"","price":4500.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/1065\/0014\/files\/generated-image.png?v=1792601398"},{"product_id":"proteco-aster-4-new-230v-swing-gate-operator-qatar","title":"Proteco ASTER 4 NEW 230V Swing Gate Operator | Qatar","description":"\u003ch3\u003eProteco ASTER 4 NEW 230V swing gate operator\u003c\/h3\u003e\n\u003cp\u003eThe Proteco ASTER 4 NEW is a telescopic electromechanical operator for automatic swing gates. Comunello Qatar supplies this 230V model for new installations and operator replacements in Qatar. Merchant-listed materials are aluminum, bronze and metal; the listed colors are gray and black, with a solid pattern.\u003c\/p\u003e\n\u003ch3\u003eSpecifications and features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum gate leaf length: 2.75 m; maximum gate leaf weight: 400 kg.\u003c\/li\u003e\n\u003cli\u003eElectrical supply: 230V AC, 50 Hz; motor power: 280 W; capacitor: 8 µF.\u003c\/li\u003e\n\u003cli\u003eMaximum thrust: 2800 N; protection rating: IP44; published duty cycle: 40%.\u003c\/li\u003e\n\u003cli\u003eMaximum opening angle: 110°, subject to mounting geometry; published 90° opening time: 22 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese figures apply to the ASTER 4 NEW 230V, not every ASTER version. Confirm the supplied nameplate and installation manual before selection.\u003c\/p\u003e\n\u003ch3\u003eInstallation and replacement uses\u003c\/h3\u003e\n\u003cp\u003eFor a new villa or double-leaf entrance installation, check each leaf’s dimensions and condition, hinge geometry, gate movement and wind exposure. Solid or privacy gates require site-specific consideration of wind loading rather than selection by leaf weight and length alone. Measure each leaf, photograph the hinges, pillars and fixing points, and check the full opening arc for walls, parked vehicles and other obstructions. The installer should confirm mounting dimensions, required stops and manual-release access against the exact model manual.\u003c\/p\u003e\n\u003cp\u003eFor replacement of an existing ASTER operator, provide the actuator label, control-board details and photographs of the mounting arrangement. Confirm the exact model, controls and 230V electrical configuration. If one leaf overlaps the other, the control sequence must suit the closing arrangement. Specify protective devices after assessing crushing and trapping points, and test movement and safety functions during commissioning. Project photos on this page show Qatar double-leaf installations, including actuator positions, brackets, cable routing and photocell placement. Compatible Remootio phone control or other access interfaces can be discussed.\u003c\/p\u003e\n\u003ch3\u003eSupply and aftercare\u003c\/h3\u003e\n\u003cp\u003eListed box contents are remotes, a sensor and a flashlight. Product price: QAR 4,700.00. Confirm whether a quotation includes one or two operators, a control panel, brackets, safety accessories and cabling. Installation, civil works and additional accessories are quoted separately unless expressly included; gate repairs should be itemised. The stated warranty is 2 years. Scheduled checks can cover hinges, brackets, gate movement, safety devices and manual release. Parts and response arrangements depend on the maintenance contract.\u003c\/p\u003e","brand":"Proteco Automation","offers":[{"title":"Default Title","offer_id":43105679573150,"sku":"PRO-ASTER4-230V","price":4700.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/1065\/0014\/files\/proteco-aster-4-new-gray-silver-swing-gate-operator.jpg?v=1792601398"},{"product_id":"proteco-shark-underground-swing-gate-operator","title":"Proteco SHARK Underground Swing Gate Operator","description":"\u003cdiv class=\"cq-product-content\"\u003e\n\u003cp\u003eProteco SHARK is an underground swing-gate operator. For a replacement, identify the existing foundation box and linkage as well as the motor; the below-ground assembly can determine whether the proposed unit fits the entrance.\u003c\/p\u003e\n\u003ch2\u003eConfirmed product details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnderground electromechanical drive.\u003c\/li\u003e\n\u003cli\u003eSHARK 230V: maximum leaf length 3.0 m and leaf weight 350 kg.\u003c\/li\u003e\n\u003cli\u003eSHARK 24V: maximum leaf length 2.5 m and leaf weight 200 kg.\u003c\/li\u003e\n\u003cli\u003eConfirm the selected motor version, foundation box and drainage arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSHARK: review the foundation box as part of the system\u003c\/h2\u003e\n\u003cp\u003eInspect drainage, cover access and corrosion around the box. A working electrical operator should not be installed into an unsuitable or waterlogged enclosure without addressing the cause. Record the hinge axis and opening arrangement before selection.\u003c\/p\u003e\n\u003ch2\u003ePrice and supply scope\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on request.\u003c\/strong\u003e Request a written quotation confirming the exact model, included equipment, availability and installation scope.\u003c\/p\u003e\n\u003ch2\u003eRequest a quotation\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/wa.me\/97430111430?text=Hello%20Comunello%20Qatar%2C%20I%20need%20a%20quotation%20for%20Proteco%20SHARK%20Underground%20Swing%20Gate%20Operator.%20Please%20confirm%20compatibility%2C%20kit%20contents%20and%20installation.%20Site%20location%3A%20\"\u003eRequest a quote on WhatsApp\u003c\/a\u003e · \u003ca href=\"\/pages\/contact\"\u003eContact Comunello Qatar\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eManufacturer documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proteco.net\/sites\/default\/files\/products-details\/depli-shark_gb.pdf\"\u003eProduct details\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proteco.net\/sites\/default\/files\/products-attached-manual\/shark_01_18_2.pdf\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan a new SHARK motor fit my existing box?\u003c\/summary\u003e\u003cp\u003eThe box, linkage and operator version must be identified together. Send photographs of the open enclosure and the model labels so compatibility and any civil work can be assessed.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I confirm the supplied Proteco SHARK Underground Swing Gate Operator configuration?\u003c\/summary\u003e\u003cp\u003eUse the product details and manufacturer documents above when reviewing the offer. The quotation must identify the selected model or variant and list included equipment and installation work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I send with my Proteco SHARK Underground Swing Gate Operator enquiry?\u003c\/summary\u003e\u003cp\u003eFor a replacement, identify the existing foundation box and linkage as well as the motor; the below-ground assembly can determine whether the proposed unit fits the entrance. Include your Qatar site location and say whether you need equipment supply, installation or a replacement assessment.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eUnderground Gate Installation in Qatar\u003c\/h2\u003e\n\u003cp\u003eCoordinate the hinge axis, foundation-box position and finished paving level before excavation. Provide a drainage arrangement that can be inspected and maintained. Confirm mounting and linkage dimensions against the exact SHARK version, particularly when reusing an existing box.\u003c\/p\u003e\n\u003ch2\u003eReplacement and Maintenance\u003c\/h2\u003e\n\u003cp\u003eA flooded or corroded foundation box needs assessment before a new motor is fitted. Request a quotation separating operator replacement, box repairs, drainage work and electrical work. Preventive checks can cover box drainage, linkage condition, release operation and safety devices.\u003c\/p\u003e\n\u003ch3\u003eWhat should I send for a SHARK quotation?\u003c\/h3\u003e\n\u003cp\u003eSend your Qatar location, leaf dimensions, opening angle, daily usage and photos of the gate hinges. For replacement enquiries, add the existing model label and accessible box photos. Ask a technician to inspect concealed equipment rather than opening electrical assemblies yourself.\u003c\/p\u003e\n\u003ch2\u003eManufacturer Technical Reference: SHARK Versions\u003c\/h2\u003e\n\u003cp\u003eProteco specifies SHARK 230V at 300 W, with a 10 µF capacitor and maximum torque of 350 Nm. SHARK 24V is specified at 50 W and maximum torque of 230 Nm. Both versions are listed with IP66 protection, a standard maximum opening angle of 110° and a 50% duty cycle.\u003c\/p\u003e\n\u003cp\u003ePublished 90° opening times are 17 seconds for SHARK 230V and 16 seconds for SHARK 24V. Confirm the exact version, mounting arrangement and manual before selection. Underground drainage remains necessary. \u003ca href=\"https:\/\/www.proteco.net\/en\/swing-gate\/shark\"\u003eProteco official SHARK specifications\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eRelated services\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/swing-gate-automation-qatar\"\u003eSwing gate automation in Qatar\u003c\/a\u003e · \u003ca href=\"\/pages\/automatic-gate-maintenance-qatar\"\u003ePreventive maintenance and AMC\u003c\/a\u003e · \u003ca href=\"\/pages\/automatic-gate-repair-qatar\"\u003eGate repair\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Proteco Automation","offers":[{"title":"Default Title","offer_id":48150128754846,"sku":null,"price":8900.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/1065\/0014\/files\/kapuprot_shark.jpg?v=1792601195"},{"product_id":"proteco-leader-ta-new-swing-gate-operator","title":"Proteco LEADER TA NEW Swing Gate Operator","description":"\u003cdiv class=\"cq-product-content\"\u003e\n\u003cp\u003eProteco LEADER TA NEW is a swing-gate operator option for an entrance with an external actuator mounting arrangement. Show the fully open and fully closed leaf positions when requesting a model assessment.\u003c\/p\u003e\n\u003ch2\u003eConfirmed product details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTelescopic drive for swing gates.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer’s LEADER TA NEW range covers leaves up to 2.8 m, subject to model and installation geometry.\u003c\/li\u003e\n\u003cli\u003eConfirm the supplied voltage, model code and leaf weight before selecting the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEADER TA NEW: assess actuator travel and stops\u003c\/h2\u003e\n\u003cp\u003eThe desired opening angle, fixing distances and physical stops must work together. If replacing an older LEADER installation, provide the old label and bracket measurements so the NEW version can be checked against the existing geometry and controller.\u003c\/p\u003e\n\u003ch2\u003ePrice and supply scope\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on request.\u003c\/strong\u003e Request a written quotation confirming the exact model, included equipment, availability and installation scope.\u003c\/p\u003e\n\u003ch2\u003eRequest a quotation\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/wa.me\/97430111430?text=Hello%20Comunello%20Qatar%2C%20I%20need%20a%20quotation%20for%20Proteco%20LEADER%20TA%20NEW%20Swing%20Gate%20Operator.%20Please%20confirm%20compatibility%2C%20kit%20contents%20and%20installation.%20Site%20location%3A%20\"\u003eRequest a quote on WhatsApp\u003c\/a\u003e · \u003ca href=\"\/pages\/contact\"\u003eContact Comunello Qatar\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eManufacturer documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proteco.net\/sites\/default\/files\/products-details\/laeder_new_ta_ver_04_22_gb.pdf\"\u003eProduct details\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proteco.net\/sites\/default\/files\/products-attached-manual\/leader_new_1_1_07_23_gb.pdf\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan LEADER TA NEW reuse older mounting brackets?\u003c\/summary\u003e\u003cp\u003eOnly after the required fixing geometry has been checked. Existing brackets may need adjustment even when the old and new operators belong to the same manufacturer.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I confirm the supplied Proteco LEADER TA NEW Swing Gate Operator configuration?\u003c\/summary\u003e\u003cp\u003eUse the product details and manufacturer documents above when reviewing the offer. The quotation must identify the selected model or variant and list included equipment and installation work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I send with my Proteco LEADER TA NEW Swing Gate Operator enquiry?\u003c\/summary\u003e\u003cp\u003eShow the fully open and fully closed leaf positions when requesting a model assessment. Include your Qatar site location and say whether you need equipment supply, installation or a replacement assessment.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eLEADER TA NEW Installation in Qatar\u003c\/h2\u003e\n\u003cp\u003eProvide each leaf's dimensions, approximate weight, hinge offset and required opening angle. A solid gate also needs a wind-exposure assessment. The actuator should be matched to the manufacturer's mounting geometry and the gate's actual operating pattern.\u003c\/p\u003e\n\u003ch2\u003eReplacement and Quotation Checklist\u003c\/h2\u003e\n\u003cp\u003eFor a replacement, send the existing label, control-board details and photographs of both fixing brackets. Confirm whether the quotation includes one or two operators, brackets, controls, safety devices, cabling and commissioning. Any mechanical repairs or bracket alterations should be itemised.\u003c\/p\u003e\n\u003ch3\u003eCan a replacement motor correct a dragging gate?\u003c\/h3\u003e\n\u003cp\u003eA dragging leaf needs its hinges, alignment and clearance assessed first. Correct mechanical resistance before fitting a new operator.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and Access Upgrades\u003c\/h2\u003e\n\u003cp\u003eAsk about compatible smartphone or access-control integration. An AMC can define checks of gate movement, mountings, protective devices and release operation, together with response arrangements and spare-parts coverage.\u003c\/p\u003e\n\u003ch2\u003eManufacturer Technical Reference: LEADER 4 TA NEW\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003e230V version\u003c\/th\u003e\n\u003cth\u003e24V version\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e280 W\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum thrust\u003c\/td\u003e\n\u003ctd\u003e2800 N\u003c\/td\u003e\n\u003ctd\u003e2500 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum leaf length\u003c\/td\u003e\n\u003ctd\u003e2.8 m\u003c\/td\u003e\n\u003ctd\u003e2.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished duty cycle\u003c\/td\u003e\n\u003ctd\u003e40%\u003c\/td\u003e\n\u003ctd\u003e80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90° opening time\u003c\/td\u003e\n\u003ctd\u003e22 seconds\u003c\/td\u003e\n\u003ctd\u003e20 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eProteco's product page shows differing 230V maximum-weight figures in its range and technical tables. Confirm the permitted leaf weight against the supplied model's current manual or written manufacturer confirmation before selection. Maximum opening angle is listed as 110°, subject to installation geometry. \u003ca href=\"https:\/\/www.proteco.net\/en\/node\/317\"\u003eOfficial Proteco LEADER TA NEW technical reference\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eRelated services\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/swing-gate-automation-qatar\"\u003eSwing gate automation in Qatar\u003c\/a\u003e · \u003ca href=\"\/pages\/automatic-gate-maintenance-qatar\"\u003ePreventive maintenance and AMC\u003c\/a\u003e · \u003ca href=\"\/pages\/automatic-gate-repair-qatar\"\u003eGate repair\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Proteco Automation","offers":[{"title":"Default Title","offer_id":48150128787614,"sku":null,"price":4500.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/1065\/0014\/files\/dsc_0317_leadernewta_24_0.jpg?v=1792601182"},{"product_id":"proteco-advantage-articulated-swing-gate-operator","title":"Proteco ADVANTAGE Articulated Swing Gate Operator","description":"\u003cdiv class=\"cq-product-content\"\u003e\n\u003cp\u003eProteco ADVANTAGE uses an articulated swing-gate arrangement. It is worth assessing where the pillar geometry makes a straight actuator difficult to position, while checking that the moving arm has enough clearance inside the entrance.\u003c\/p\u003e\n\u003ch2\u003eConfirmed product details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArticulated-arm drive for swing gates.\u003c\/li\u003e\n\u003cli\u003eMaximum gate leaf length: 2.0 m; this is leaf length, not gate height.\u003c\/li\u003e\n\u003cli\u003eManufacturer variants include 230V and 24V; confirm the supplied version and its weight limit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eADVANTAGE: allow space for the articulated arm\u003c\/h2\u003e\n\u003cp\u003eShow walls, fences and obstacles behind the open leaf. The arm must remain clear throughout movement, and its joints introduce areas that need consideration in the safety assessment. Confirm the exact operator version and fixing dimensions with the manual.\u003c\/p\u003e\n\u003ch2\u003ePrice and supply scope\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on request.\u003c\/strong\u003e Request a written quotation confirming the exact model, included equipment, availability and installation scope.\u003c\/p\u003e\n\u003ch2\u003eRequest a quotation\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/wa.me\/97430111430?text=Hello%20Comunello%20Qatar%2C%20I%20need%20a%20quotation%20for%20Proteco%20ADVANTAGE%20Articulated%20Swing%20Gate%20Operator.%20Please%20confirm%20compatibility%2C%20kit%20contents%20and%20installation.%20Site%20location%3A%20\"\u003eRequest a quote on WhatsApp\u003c\/a\u003e · \u003ca href=\"\/pages\/contact\"\u003eContact Comunello Qatar\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eManufacturer documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proteco.net\/sites\/default\/files\/products-details\/advantage_ver04_22_gb_it_0.pdf\"\u003eProduct details\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proteco.net\/sites\/default\/files\/products-attached-manual\/advantage_14_22_0.pdf\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat clearance does the ADVANTAGE arm need?\u003c\/summary\u003e\u003cp\u003eThe requirement depends on the mounting geometry and intended opening angle. Send an overhead sketch with pillar and wall dimensions so the arm sweep can be checked before installation.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow do I confirm the supplied Proteco ADVANTAGE Articulated Swing Gate Operator configuration?\u003c\/summary\u003e\u003cp\u003eUse the product details and manufacturer documents above when reviewing the offer. The quotation must identify the selected model or variant and list included equipment and installation work.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat should I send with my Proteco ADVANTAGE Articulated Swing Gate Operator enquiry?\u003c\/summary\u003e\u003cp\u003eIt is worth assessing where the pillar geometry makes a straight actuator difficult to position, while checking that the moving arm has enough clearance inside the entrance. Include your Qatar site location and say whether you need equipment supply, installation or a replacement assessment.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eChoosing ADVANTAGE for Your Entrance\u003c\/h2\u003e\n\u003cp\u003ePhotograph the pillar and hinge from above, and show the leaf fully open. Assess the arm's entire sweep for walls, fences and stored items. Available mounting space and safe clearance matter alongside leaf dimensions and operating frequency.\u003c\/p\u003e\n\u003ch2\u003eInstallation and Safety Assessment\u003c\/h2\u003e\n\u003cp\u003eThe installer should confirm bracket positions, mounting strength, stops, electrical supply and control configuration against the selected operator manual. Assess pinch points around the arm joints and gate, then specify suitable protective measures. Test installed safety functions during commissioning.\u003c\/p\u003e\n\u003ch3\u003eWhich version should I order?\u003c\/h3\u003e\n\u003cp\u003eConfirm the exact voltage, operator code, control panel and required accessories in the written quotation. Different versions should not be assumed interchangeable with existing wiring or controls.\u003c\/p\u003e\n\u003ch2\u003eAftercare for Articulated Gate Motors\u003c\/h2\u003e\n\u003cp\u003eRequest maintenance checks of arm joints, bracket security, gate hinges, safety devices and manual release in accordance with manufacturer instructions. Compatible access upgrades and AMC coverage can be quoted after assessment.\u003c\/p\u003e\n\u003ch2\u003eManufacturer Technical Reference: ADVANTAGE\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003e230V version\u003c\/th\u003e\n\u003cth\u003e24V version\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum torque\u003c\/td\u003e\n\u003ctd\u003e280 Nm\u003c\/td\u003e\n\u003ctd\u003e200 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum leaf weight\u003c\/td\u003e\n\u003ctd\u003e250 kg\u003c\/td\u003e\n\u003ctd\u003e200 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum leaf length\u003c\/td\u003e\n\u003ctd\u003e2.0 m\u003c\/td\u003e\n\u003ctd\u003e2.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90° opening time\u003c\/td\u003e\n\u003ctd\u003e18 seconds\u003c\/td\u003e\n\u003ctd\u003e14 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eProteco lists a maximum opening angle of 130°. Actual suitability and angle depend on mounting geometry, gate condition and model selection. The 230V version uses a 10 µF capacitor. Confirm supplied controls and accessories in the quotation. \u003ca href=\"https:\/\/www.proteco.net\/en\/swing-gate\/advantage\"\u003eOfficial Proteco ADVANTAGE technical data\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eRelated services\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/swing-gate-automation-qatar\"\u003eSwing gate automation in Qatar\u003c\/a\u003e · \u003ca href=\"\/pages\/automatic-gate-maintenance-qatar\"\u003ePreventive maintenance and AMC\u003c\/a\u003e · \u003ca href=\"\/pages\/automatic-gate-repair-qatar\"\u003eGate repair\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Proteco Automation","offers":[{"title":"Default Title","offer_id":48150128820382,"sku":null,"price":6500.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/1065\/0014\/files\/image_86c51728-a456-4fa1-95ed-61ffc0e0490f.png?v=1792601186"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/1065\/0014\/collections\/image_69389b3e-b94e-43e3-951c-41b31efe2710.jpg?v=1779967676","url":"https:\/\/comunelloqa.com\/collections\/proteco-swing-gate-motor.oembed","provider":"Comunello Qatar","version":"1.0","type":"link"}